SD-GBR-Comfix

DSI GBR Comfix Premium Kit is a full and complete GBR solution including all that you will need for a GBR procedure. It is a perfect answer for fixating membranes and dressings of all kinds, soft, collagen membranes, PTFE and titanium reinforced and mesh titanium plates. This kit contains different tacks and screws for membrane fixation. The screws allow easy and fast fixation of the membrane in all kinds of cases, even in the most difficult and demanding with limited space and access. The screws can stabilize the membrane through the healing process without interference. The tacks could be used for collagen membranes, PTFE membranes, and even for titanium mesh plates in rare cases. The main advantage of the tacks is their ability to fixate the membrane without preliminarily drilling through the bone. The tacks can be fixated right away and hold the membrane as long as the healing process takes place.

DSI GBR Comfix Premium Kit includes screws, tacks, and membranes which are all made of the highest-quality titanium alloy. The titanium membrane can be shaped and cut as you see fit. This kit includes drills and drivers that will ease the manipulation of screws and tacks during surgical procedures. The instruments provided in the kit allow you to work on more challenging cases, expanding the level of care for your patients. All the instruments are made of the highest quality stainless steel. Everything in the DSI GBR Comfix Premium Kit can be sterilized in an autoclave including the box.

DSI GBR tack kit includes titanium tacks and titanium membranes. The tacks allow easy and fast fixation of the membrane. The tacks and the membranes are made of the highest quality titanium alloy. The tacks can stabilize the membrane through the healing process without interference. Although the membrane is made of titanium it can be cut and shaped with convenience and ease.

Never Loss Bone Collector Kit

Auto Bone Kollector kit
Never Loss bone collector tool for removing the patient’s own bone for autotransplants with the drill (similar bone harvesting as with a bone scraper) during implant surgery.
It is possible to set a precise starting point with a drill hole in order to harvest the bone flakes at the desired location.

Implant Positioning Guide Kit

The Implant Positioning Guide Kit is used for the placement of dental implants with the use of positioning guides and pins. The guides provided slide over a pilot drill which help center the drill between adjacent teeth. After the osteotomy is prepared, surgeons can preserve the space using a guide pin. This is especially useful when more than one implant is placed across the ridge. The Implant Positioning Guide Kit allows for the accurate placement of implants without costly surgical guides, making this kit an essential part of any implant practice.

This kit is used for the positoning of dental implants with the use of positioning guides. These guides slide over a pilot drill and help center the drill between adjacent teeth. After the osteotomy is prepared, surgeons can preserve the space using a guide pin. This is especially useful when more than one implant is placed in line with another. No printing of surgical guides are needed, making this an inexpensive yet effective option.

Fixture & Screw Remover Kit

Surgident Implant und Screw Remover Kit

• Description

• Used to remove both failed implants and broken prosthetic screws

Sterilization

• Clean and wash components using an ultrasonic cleaner
• Do not exceed 175° C or 275° F

Components

• Kit Includes
  • (2) Remover Drills
    • (1) 0.8mm Remover Drill
    • (1) 1.3mm Remover Drill
  • (2) Tap Drills
    • (1) 0.8mm Tap Drill
    • (1) 1.3mm Tap Drill
  • (2) Remover Drills
    • (1) 0.8mm Reverse Drill
    • (1) 1.3mm Reverse Drill
  • (1) Latch style finger knob
  • (1) 4x4mm square finger knob
  • (1) Square to latch adaptor
  • (1) Square extension
  • (1) Flat Tip Driver
  • (7) Removal Guides
    • (1) External Mini Guide
    • (1) External Regular Guide
    • (1) Octa Internal Guide
    • (1) Internal Hex Guide
    • (1) 3.7/4.1 TSV Guide
    • (1) Tri-lobe Guide
    • (1) Sub Narrow Guide
  • (4) Fixture Removers
    • (1) 1.6mm Fixture Remover
    • (1) 1.8mm Fixture Remover
    • (1) 2.0mm Fixture Remover
    • (1) 2.5mm Fixture Remover
  • (1) Guide Holder
  • (1) Wrench